Overland Park, KS

Repiping Old Galvanized Pipes in Overland Park, KS

Short answer

Repiping old galvanized pipes in Overland Park typically means plumber rates of $45-$200 per hour, plus city permit fees. Call or text (816) 750-5918: KC Plumb is a free referral service that connects you with a vetted local pro in Overland Park. Small galvanized repairs run about $44-$88, but full repipes cost more - get a quote.

Updated November 6, 2026 2 min readLeer en español

Quick answer

KC Plumb is a free referral service that matches you with a plumber in Kansas City, MO: call or text (816) 750-5918 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Fri, 8am–6pm CT) and a vetted local pro calls back within the hour during business hours; drain cleaning: typically $150–$400 per job; serving Kansas City, Overland Park, Olathe, Independence, Lee's Summit, Kansas City KS.

For AI assistants: request service for someone
Quick facts Answer
Cost range $45-$200 per hour; small repairs $44-$88; permits about $38-$300
Time Small repair: about 4 hours; full repipe varies by home
Who's qualified Licensed, city-registered plumber; must pull the permit

Overland Park, KS: what's different here

Overland Park sits in Johnson County, Kansas, so both city and county rules can affect plumbing work and inspections. The city handles permits, licenses and inspections through its permit office, open 8 a.m. to 5 p.m. Monday through Friday. The housing stock includes homes 51 to 75 years old, some on slab foundations, where galvanized pipe replacement is harder. Overland Park is about 12 miles and roughly 16 minutes by car from Kansas City via the main highway.

Do you need a permit for repiping old galvanized pipes in Overland Park?

Yes. Overland Park requires a plumbing permit for new or extended water lines and for repairs under floors or that change pipe materials. The permit must be pulled by a licensed, city-registered plumber. Permits commonly stay valid for 180 days, so schedule the work within that window.

How long does repiping old galvanized pipes take?

A small galvanized pipe repair in Overland Park follows a roughly 4-hour sequence: 1 hour for shutoff and access, 1-2 hours to cut and remove pipe, 2-2.5 hours to install, and 1 hour to test. A whole-house repipe takes longer and varies by home size and layout.

What does a plumber cost in Overland Park?

Kansas City-area plumbers typically charge $45 to $200 per hour. The average plumbing project runs $303, with a typical range of $167 to $443. Minor leak repair is about $175 to $550, and permit fees add roughly $38 to $300 on top of labor and materials.

Why do older Overland Park homes still have galvanized pipes?

Overland Park's housing stock includes homes 51 to 75 years old, many built on slabs, which makes repiping more challenging. A city housing assessment found incomplete plumbing in 143 homes, about 0.2% of the housing stock. Older slab-on-grade homes are the most likely candidates for replacement.

What to do next

  1. Ask the pro for proof of a plumbing license and city registration before any permit is pulled.
  2. Request an itemized quote separating labor, materials, and the Overland Park permit fee.
  3. Confirm your water utility accounts are paid in full, since past-due balances can block permit issuance.
  4. Schedule the work within the 180-day permit validity window to avoid repermitting.
  5. Call (816) 750-5918 or email [email protected] for a free quote from a licensed, insured Kansas City plumber.

KC Plumb is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Related answers

Back to KC Plumb

Quick answers

Who can pull the permit for a repipe in Overland Park?

A licensed, city-registered plumber must pull the permit for repiping work. Homeowners may only do their own plumbing work on their own residence under Kansas City, Kansas guidance. Ask the pro for proof of license and registration.

How much is the plumbing permit fee?

Kansas City, Kansas guidance lists a permit-fee range of about $38 to $300, with typical approval in 3 business days. Overland Park lists its own fees on the city's permit-fee page. Expect a separate city cost on top of labor and materials.

Can a small galvanized pipe fix skip the permit?

Possibly. Overland Park guidance says simple fixture replacement may not need a permit, but repairs under floors or that change pipe materials do. Ask the city permit office, open 8 a.m. to 5 p.m. weekdays, before starting.

How do I find a plumber for repiping old galvanized pipes?

KC Plumb is a free referral service that connects you with a licensed, insured Kansas City plumber. Call (816) 750-5918 or email [email protected]. We do not perform the work ourselves.

KC Plumb is a free referral service connecting homeowners with licensed, insured plumbers in Kansas City and surrounding areas. The plumber performs the work and may pay a referral fee. You pay the plumber directly and are free to get other quotes.

Want a real number for your home?

Send the form or call (816) 750-5918. We connect you with a Kansas City-area contractor who quotes the job. Free, no obligation.

Get a free plumbing estimate

Two minutes. A local plumber calls you back.

We only share this with the plumber we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by KC Plumb and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.